What Is TracPipe?

TracPipe is a flexible stainless steel piping material used for natural gas and propane installations. TracPipe is currently in use for gas piping systems in single and multi-family residential as well as commercial and industrial buildings. TracPipe's superior corrugated tubing coupled with AutoFlare fittings combine to make the best CSST product available. TracPipe's full range of sizes (3/8" to 2") and proven reliability make it the first choice at all residential, commercial, and industrial job sites.

Gas piping has a new look…
At the hub of the installation is a multiport manifold. From there TracPipe can go anywhere - around obstructions, across attics, or between joists and studs. You pull it just like electric wiring. Protect it with striker plates and your options are endless.

Adding a last minute appliance in a TracPipe house? No need to rip out that perfect drywall. Grab some AutoFlare fittings and a tee - you can bend TracPipe with your hands and it holds its shape. Add-ons have never been easier.

Doing a renovation and need to maintain architectural integrity? No problem, just connect into existing black iron pipe and feed TracPipe up to the new master bedroom fireplace or second floor laundry.

Need to supply gas to an outdoor barbeque or pool heater; TracPipePS-II is the first choice for underground and under slab installations providing standard 250-foot lengths, a factory installed watertight sleeve and vent capable containment fittings.

TracPipe is accepted throughout the US and Canada. It can be run through buildings in the same locations where rigid pipe materials have traditionally been used with a fraction of the threaded joints and in a fraction of the time required for installation. TracPipe was designed with inner diameters that are very close to black iron pipe. Because of the corrugated interior different capacity charts are used for sizing of CSST systems. Shown below are TracPipe charts for low-pressure natural gas and propane as well as elevated pressure (2-PSI) charts for natural gas and propane. Also available for free download is our Specifier Sizing Program v3.5.

W-whatis-0904