OMEGAFLEX Home
The OmegaFlex Advantage
 Working Pressure Preview
Terminology

Product Specifications
Stainless Annular Hose
Stainless Tubular & Braided Braid
Stainless Abrasion Resistant Braid
Stainless High Pressure Hose
Stainless Helical Hose
Stainless Tubular Braid
Bronze Annular Hose
Bronze Tubular Braid
Monel Annular Hose
Monel Tubular Braid
Hose Assemblies
Engineering & Design

Limited Warranty
Disclaimer
Contact OmegaFlex

Product Specification > Stainless Braid

Tubular Braid

Tubular Braid for Series 100
Braided Braid for Series 100
Specifying Part Numbers for Stainless Tubular Braid Products

  • Materials available include 304, 321 and 316 stainless steel
  • Wide range of constructions including 24 and 36 carrier designs
  • Clean and oil-free
  • Soft texture allows for easy trimming and quicker hose assembly fabrication
  • Long mill lengths for less waste
  • Engineered for optimal hose coverage
  • Manufactured on OmegaFlex hose mandrels to ensure proper braid angle
  • Custom braiding to customer specifications is available in 304, 321 and
    316L stainless steel, bronze, monel, exotic alloys and synthetic materials

Tubular Braid for Series 100 Hose — Stainless Steel T304, T321 and T316
Nominal
Hose
Size (in.)		 Braid
Type		 Braid
Construction		 Braid I.D.
(in.)		 Braid
Coverage
(%)		 Max. Working
Pressure at
70°F (PSIG)a		 Weight
Per Foot
(lb.)		 Typical
Mill Length
(ft.)b
1/4
 
24 x 6 x .012
0.46
90
 2625
0.065
30–100
3/8   24 x 8 x .012 0.61 94 1650 0.098 30–100
1/2   24 x 8 x. 012 0.75 86 1100 0.101 30–100
3/4   36 x 8 x .012 1.04 90 800 0.143 30–100
1   36 x 8 x .016 1.34 88 750 0.268 30–100

a. Maximum working pressure shown is calculated for OmegaFlex helical hose and corresponding single layer braid. See Stainless Helical Hose specifications for additional information.
b. Consult factory for longer lengths.

TOP


Abrasion Resistant Tubular Braid for Series 100 Hose — Stainless Steel T304
Nominal
Hose
Size (in.)
 Braid
Typea		 Braid
Construction		 Braid I.D.
(in.)		 Braid
Coverage
(%)		 Max. Working
Pressure at
70°F (PSIG)b		 Weight
Per Foot
(lb.)
Typical
Mill Length
(ft.)c
1/4
 H
24 x 7 x .012
0.46
96
 2625
0.130
30–100
3/8 H 24 x 8 x .016 0.61 94 1650 0.168 30–100
1/2 H 24 x 8 x. 016 0.75 95 1150 0.200 30–100
3/4 H 36 x 7 x .020 1.04 94 800 0.310 30–100
1 H 36 x 6 x .024 1.34 95 750 0.450 30–100

a. Abrasion resistant braid in abrasive environments extends hose life. Abrasive resistant braid is not intended for use in high pressure applications - see Series 800 high pressure hose specifications for additional information.
b. Maximum working pressure shown is calculated for OmegaFlex helical hose and corresponding single layer braid. See Series 100 helical hose specifications for additional information.
c. Consult factory for longer lengths.

TOP


Specifying Part Numbers for Helical Braid Products

TOP


OMEGAFLEX®, Inc., 451 Creamery Way, Exton, PA 19341-2509
Tel: 1-610-524-7272     Fax: 1-610-524-7282
Call 1-800-355-1039
E-mail: info@omegaflex.net
Request a printed catalog
W-stubbrd-0900