OMEGAFLEX Home
The OmegaFlex Advantage
 Working Pressure Preview
Terminology

Product Specifications
Stainless Annular Hose
Stainless Tubular & Braided Braid
Stainless Abrasion Resistant Braid
Stainless High Pressure Hose
Stainless Helical Hose
Stainless Tubular Braid
Bronze Annular Hose
Bronze Tubular Braid
Monel Annular Hose
Monel Tubular Braid
Hose Assemblies
Engineering & Design

Limited Warranty
Disclaimer
Contact OmegaFlex

Product Specification > Stainless Braid

Tubular & Braided

Tubular Braid for Series 300
Braided Braid for Series 300

  • Materials available include 304, 321 and 316 stainless steel
  • Wide range of constructions including 24, 36, 48, 72, 96 and 128 carrier designs
  • Clean and oil-free
  • Soft texture allows for easy trimming and quicker hose assembly fabrication
  • Long mill lengths for less waste
  • Engineered for optimal hose coverage
  • Manufactured on OmegaFlex hose mandrels to ensure proper braid angle
  • Custom braiding to customer specifications is available in 304, 321 and 316L stainless steel, bronze, monel, exotic alloys and synthetic materials

Tubular Braid for Series 300 Hose — Stainless Steel T304, T321 and T316
Nominal
Hose
Size (in.)
Braid
Typea
Braid
Construction
Braid I.D.
(in.)
Braid
Coverage
(%)
Max. Working
Pressure at
70°F (PSIG)b
Weight
Per Foot
(lb.)
Typical
Mill Length
(ft.)c
1/4
 
24 x 6 x .012
0.46
90
 2375
0.065
30–100
3/8   24 x 8 x .012 0.61 94 1650 0.098 30–100
1/2   24 x 8 x. 012 0.75 86 1100 0.101 30–100
3/4   36 x 8 x .012 1.04 90 800 0.143 30–100
1   36 x 8 x .016 1.34 88 750 0.268 30–100
1-1/4   48 x 8 x .016 1.65 97 725 0.375 30–60
1-1/2   48 x 8 x .016 1.90 96 565 0.377 30–60
2   48 x 8 x .020 2.50 96 500 0.680 30–60
2-1/2   72 x 8 x .020 3.33 90 400 0.710 30–60
3   72 x 8 x .020 3.89 86 288 0.760 30–60
3-1/2   72 x 10 x .020 4.36 86 285 1.150 30–50
4   72 x 10 x .020 4.83 84 250 1.130 30–50
5 A 96 x 8 x .025
96 x 12 x .020		 5.94
5.94		 87
93		 200
200		 1.320
1.230		 30–100
40–78
6 A 96 x 8 x .025
96 x 1 2 x .020		 6.95
6.95		 82
87		 175
175		 1.470
1.450		 50–100
40–66

a. Standard braid constructions are shown without a type designation. The “A” designation is an optional braid design for alternate pressure capability.
b. Maximum working pressure shown is calculated for OmegaFlex annular hose and corresponding single layer braid. See Series 300 annular hose specifications for additional information. Performance may be reduced if braid is not used on OmegaFlex hose.
c. Consult factory for longer lengths.

TOP


Braided Braid for Series 300 Hose — Stainless Steel T304
Nominal
Hose
Size (in.)
Braid
Typea
Braid
Construction
Braid I.D.
(in.)
Braid
Coverage
(%)
Max. Working
Pressure at
70°F (PSIG)b
Weight
Per Foot
(lb.)
Typical
Mill Length
(ft.)c
5
A
96 x (13 x .025)
128 x (21 x .016)
5.94
5.94
84
84
 245
245
2.31
2.29
50–100
30–77
6 A 96 x (13 x .025)
128 x (21 x .016)		 6.95
6.95		 96
96		 275
250		 2.75
2.70		 50–100
30–65
8 A 96 x (17 x .025)
128 x (25 x .016)		 9.08
9.08		 87
99		 212
175		 3.41
3.34		 50–100
30–65
10 A 96 x (29 x .025)
128 x (25 x .020)		 11.10
11.10		 93
97		 175
185		 3.94
3.90		 50–100
30–60
12 A 96 x (29 x .024)
128 x (25 x .024)		 13.22
13.22		 91
96		 160
170		 5.95
5.90		 50–100
30–60
14   96 x (29 x .025) 16.40 74 110 6.54 10–30

a. Standard braid constructions are shown without a type designation. The “A” designation is an optional braid design for alternate pressure capability.
b. Maximum working pressure shown is calculated for OmegaFlex annular hose and corresponding single layer braid. See Series 300 annular hose specifications for additional information. Performance may be reduced if braid is not used on OmegaFlex hose.
c. Consult factory for longer lengths.

TOP


OMEGAFLEX®, Inc., 451 Creamery Way, Exton, PA 19341-2509
Tel: 1-610-524-7272     Fax: 1-610-524-7282
Call 1-800-355-1039
E-mail: info@omegaflex.net
Request a printed catalog
W-stub-0900