OMEGAFLEX Home
The OmegaFlex Advantage
 Working Pressure Preview
Terminology

Product Specifications
Stainless Annular Hose
Stainless Tubular & Braided Braid
Stainless Abrasion Resistant Braid
Stainless High Pressure Hose
Stainless Helical Hose
Stainless Tubular Braid
Bronze Annular Hose
Bronze Tubular Braid
Monel Annular Hose
Monel Tubular Braid
Hose Assemblies
Engineering & Design

Limited Warranty
Disclaimer
Contact OmegaFlex

Product Specification > Stainless Braid

Abrasion Resistant

Abrasion Resistant Tubular Braid for Series 300
Specifying Part Numbers for Abrasion Resistant Braid Products

  • Materials available include 304, 321 and 316 stainless steel
  • Wide range of constructions including 24, 36, 48, 72, 96 and 128 carrier designs
  • Clean and oil-free
  • Soft texture allows for easy trimming and quicker hose assembly fabrication
  • Long mill lengths for less waste
  • Engineered for optimal hose coverage
  • Manufactured on OmegaFlex hose mandrels to ensure proper braid angle
  • Custom braiding to customer specifications is available in 304, 321 and 316L stainless steel, bronze, monel, exotic alloys and synthetic materials

Abrasion Resistant Tubular Braid for Series 300 Hose — Stainless Steel T304
Nominal
Hose
Size (in.)
Braid
Type
Braid
Construction
Braid I.D.
(in.)
Braid
Coverage
(%)
Max. Working
Pressure at
70°F (PSIG)a,b
Weight
Per Foot
(lb.)
Typical
Mill Length
(ft.)c
1/4
H
24 x 7 x .012
0.46
96
 2375
0.130
30–100
3/8 H 24 x 8 x .016 0.61 94 1650 0.168 30–100
1/2 H 24 x 8 x. 016 0.75 95 1100 0.200 30–100
3/4 H 36 x 7 x .020 1.04 94 800 0.310 30–100
1 H 36 x 6 x .024 1.34 95 750 0.450 30–100
1-1/4 H 48 x 7 x .024 1.78 98 725 0.600 30–60
1-1/2 H 48 x 7 x .024 2.09 95 565 0.700 30–60
2 H 48 x 7 x .028 2.54 96 500 0.874 30–60
2-1/2 H 72 x 8 x .024 3.33 97 400 1.127 30–60
3 H 72 x 9 x .024 3.89 97 288 1.430 30–60
4 H 72 x 10 x .024 4.83 96 250 1.535 30–50

a. Maximum working pressure shown is calculated for OmegaFlex annular hose and corresponding single layer braid. See Series 300 annular hose specifications for additional information.
b. Abrasion resistant braid in abrasive environments extends hose life. Abrasive resistant braid is not intended for use in high pressure applications - see Series 800 high pressure hose specifications.
c. Consult factory for longer lengths.

TOP


Specifying Part Numbers for Abrasion Resistant Braid Products

TOP


OMEGAFLEX®, Inc., 451 Creamery Way, Exton, PA 19341-2509
Tel: 1-610-524-7272     Fax: 1-610-524-7282
Call 1-800-355-1039
E-mail: info@omegaflex.net
Request a printed catalog
W-stab-0900